Multi-helical PCF and OAM

Chiral materials consist of many identical units (molecules or nanostructured elements) that are either randomly oriented in solution or arranged in an ordered fashion. They are ubiquitous in nature—for example, most biological molecules come in right and left-handed forms—and are finding an increasing number of applications in science and technology. Twisted photonic crystal fibre (t-PCF), in contrast, consists of a single uniaxial chiral unit that is infinitely extended in the third dimension—the direction of the twist. PCF itself typically consists of a hexagonal array of hollow microchannels running along the length of a glass fibre ~100 µm thick, so that when twisted it resembles a "multi-helix" of spiralling microchannels around a central axis. Over the past several years we have been studying the behaviour of light in a range of different types of t-PCF, in the process uncovering some surprising phenomena (for example, a PCF with no core that nevertheless guides light) and exploring potential applications. For a recent review see this paper.

Left: Sketch of a twisted single-solid-core PCF, showing how it has the appearance of a multi-helix. Right: Photograph of the pattern seen from the side. Six dark stripes correspond to one helical pitch.

Fabrication of t-PCF

We use two techniques for producing t-PCF. In the first, an untwisted PCF is post-processed under CO2 laser heating, the fibre being mounted between a motorized rotation stage and a rigid support [Shin (2009)]. As the motor rotates, the focused 10 µm laser beam is scanned along the fibre using a steering mirror fixed to a precision motorized translation stage. Once the target twist period and sample length are set, the laser power and the scanning speed are chosen so as to heat the fibre to the glass-softening temperature. The writing process is computer-controlled and is capable of achieving twist periods as short as 300 μm. The second technique involves spinning the glass preform during fibre drawing, using a motor rotating at a few thousand rpm and a rotary joint with multiple inlets for controlling the pressure inside the hollow channels. It has the advantage that long lengths (100s of metres) of helical PCF with twist periods of a few millimetres can be readily fabricated.

Fabrication procedures for t-PCF (a) Thermal post-processing using a scanned carbon dioxide laser beam to heat the fibre to its softening temperature while spinning one fibre end, the other being rigidly fixed. (b) Spinning the glass preform during fibre drawing in the pulling tower.

Topological effects

The study of electromagnetic wave propagation in helical structures began in earnest in the 1940s, with the invention of the travelling-wave tube amplifier. In this device a microwave signal is guided along a helical wire that spirals around an axially propagating electron beam [Kompfner (1947)]. Since the physical distance over which the spiralling microwave signal travels is longer than the distance directly along the axis, its group and phase velocities are both effectively reduced. By appropriate design the velocity difference between the two waves can be adjusted, permitting the microwave signal to be amplified with power from the electron beam. In a similar manner, the geometrical stretching of the cladding structure in a t-PCF causes the effective optical path-length along the axis, and thus the effective refractive index, to increase topologically with radius ρ following the relationship neff(ρ) = n0√(1 + α2ρ2) where n0 is the index in the untwisted case and α the twist rate in rad/m.

Cut through the refractive index distribution of an untwisted (upper) and twisted (lower) solid-core PCF (schematic). The increase in optical path-length along the spiral paths raises the effective axial refractive indices approximately quadratically with radius.

Spectral dips in t-PCF with single core

This topological effect makes it possible for example to phase-match light guided in a central solid glass core (modal index nc) to the fundamental space-filling mode in the cladding (phase index nSM in the untwisted fibre) with the result that light can leak out into cladding modes at certain wavelengths. This results in a series of dips in the transmission spectrum, caused by anti-crossings between the core mode and leaky ring-shaped cladding modes carrying orbital angular momentum (OAM), each dip corresponding to a different OAM order [Wong (2012)]. Since the cladding light is diverted by the hollow channels into a spiral path, the azimuthal component of its wavevector must take values that yield a round-trip phase advance that is an integer multiple  of 2π, where  is the OAM order. This leads to a resonance condition that yields remarkably good agreement with experimental measurements, showing in particular that the dip wavelengths scale linearly with the twist rate. We have used the twist and strain sensitivity of these dips to construct an all-optical twist-strain transducer [Xi (2013)].

(a) Transmission spectrum in a solid-core PCF with a twist rate of 10.8 rad/mm. Experiment and numerical modelling agree quite well. (b) Calculated field intensity profiles of the coupled core-cladding modes at two of the spectral dips, showing the ring-shaped helical Bloch modes in the cladding.

Helical Bloch waves

Understanding the physics of light propagation in t-PCF is quite challenging, because the natural coordinate system—helicoidal—is non-orthogonal. This led us to introduce a new concept: helical Bloch waves. The optical Bloch waves of any untwisted periodic structure are mathematically described by the product of a periodic function (with periodicities that match the structure) and a term representing the phase progression of the Bloch wave [Russell (1986)]. A convenient physical picture for the modes guided in a t-PCF can be constructed by generalising Bloch's theorem so that the azimuthally periodic function follows the twist. At any given value of z, the periodic function will repeat at angular intervals 360°/N, where N is the number of times the structure repeats over one complete revolution. The Bloch waves can then be calculated analytically using an expansion in terms of azimuthal harmonics of OAM order. Substituting this field Ansatz into Maxwell's equations allows the dispersion relation to be derived and the properties of the modes to be investigated [Xi (2014)]. To explore the properties of helical Bloch waves, we fabricated a t-PCF with a ring of six solid glass "satellite" cores around its axis. This structure supports 6 non-degenerate helical Bloch modes with different values of orbital angular momentum, in both left and right circularly polarised states [Russell (2017)]. To determine the OAM order of the modes guided through the t-PCF, the output was superimposed on to a divergent Gaussian beam and the resulting fringe pattern imaged using a CCD camera. The single- and double-spiral interference patterns below confirm that the fibre generates optical vortices and preserves the magnitude and sign of the OAM for all four modes. Similar experiments carried out at multiple wavelengths and for fibres up to 50 m long have confirmed that the t-PCFs preserve the magnitude and sign of the OAM.

(a) Scanning electron micrograph of a t-PCF with six satellite cores. The twist rate ? is 2.9 rad/mm. (b) Experimental spiral patterns created when modes of different principal OAM order interfere with a divergent Gaussian beam, after propagation along the t-PCF. The upper fibre has 6 cores and the lower, 3.

Guidance of light in twisted space

We have discovered a new mechanism of light guidance, based on a t-PCF with no core [Beravat (2016)]. Cleaving the fibre and examining its cross-section reveals a complete absence of any structure at which light could be trapped. Nevertheless it supports a guided mode: the helical twist creates a topological channel within light is robustly trapped. This arises from the quadratic increase in optical path length with radius (see here), which produces a radial gradient in axial refractive index, creating a potential well within which light is confined by photonic bandgap effects. Using mathematical tools from general relativity [Russell (1999)], we have shown that the geodesics of the light follow closed spiral paths within the topological channel, forming modes that carry OAM. The effective area of these modes decreases with twist rate α, so that by varying the twist rate along the fibre, it would be possible to create fibres whose mode-field diameter changes with position. Unlike in conventional index-guiding fibres, where the guided mode shifts towards the outside of the bend ("normal cornering"), this highly unusual mode shifts inwards towards the bend ("anomalous cornering"). Hamiltonian optics shows that the mode may be viewed as having negative effective mass (caused by the opposite sign of the dispersion surface curvature), so that it moves in the opposite direction when subject to bend forces. 

(a) Scanning electron micrograph of the microstructure of a t-PCF without a core. The axis of rotation coincides approximately with the hollow channel in the centre. (b) Experimental (upper) and calculated (middle) normalised intensity distributions at 818 nm for three different twist rates.